TPK1032 Series 3-Channel Simple Power Sequencer
The TPK1032 series products are simple power sequencers, which provide power-up and power-down sequence control of multi-channel power supplies. Furthermore, the TPK1032 series support maximum three devices cascaded to control sequence of nine-channel power rails in one system. The TPK1032 series products have three open-drain output channels, and all the channels can be pulled up to any required voltage level equal or lower than VCC. When the TPK1032 series are enabled with EN pin goes high, the three output channels turn to high with the sequence of FLAG1-FLAG2-FLAG3 after the selected delay period individually; When the TPK1032 series are disabled with EN pin goes low, the three output channels turn low one by one with the selected sequence after the selected delay period individually. The TPK1032 series products provide SOT23-6 package with guaranteed junction temperature range (TJ) from –40°C to +125°C.
Features
◼ Input Voltage Range: 2.5 V to 5.5V
◼ Power-Up and Power-Down Sequence Control
◼ Single Enable Control Signal Input Channel
◼ Three Power Sequence Channels:
◆ Open-Drain Output
◆ Selectable Timing Options
◆ Selectable Power-Down Sequence Options
◼ Support Cascaded Device Output
◼ Low Power Consumption
◼ Junction Temperature: –40°C to +125°C
◼ Small SOT23-6 Package
Applications
◼ Video Surveillance
◼ Network Equipment and Servers
◼ Industrial Control
◼ FPGA/ASIC/CPLD Power Sequence Control
◼ Power Supply Sequence Control
Contact:betty yang
Phone:886-18126447568
Email:sale_seqentech@163.com
Add:Room 1512, 15th Floor, Lucky Centre, 165-171 Wan Chai Road, Wan Chai, Hong Kong