TPA6581/TPA6582/TPA6584 5-V, Rail-to-Rail Input/Output, 10 MHz Op Amp

　　The TPA658X series is CMOS single, dual, and quad RRIO op-amps with low offset, low power and stable high frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve high-performance AC with 10 MHz bandwidth, 8 V/μs slew rate and low distortion while drawing only 1.2 mA of quiescent current per amplifier. The TPA658X devices are suitable for audio and motor control application.

　　The TP658X series has isolation during power off even when the signal exits on the input pins as there is no ESD diode from the input pins to the positive power supply pin.

　　Features

　　 Supply Voltage: 2.7 V to 5.5 V

　　 Offset Voltage: ±2 mV Maximum

　　 Bandwidth: 10 MHz, Slew Rate: 8 V/μs

　　 Low Power: 1.2 mA per channel

　　 Rail to rail input and output

　　 Low 1/f Noise: 10 nV/√Hz at 1 kHz

　　 No significant output glitch when power on and off

　　 –40°C to 125°C Operation Temperature Range

　　Applications

　　 Instrumentation

　　 Audio